Concrete Industry
Marcantonini
Batching Plant & Concrete Distributor
World-class batching plants engineered for zero-slump, dry-mix concrete with superior humidity control.
Poyatos
Modular Paving Block Machine
Fully integrated plant solutions for concrete masonry, paving blocks and landscape products, trusted in 80+ countries.
Colle
Pipe & Box Culvert Machine
Italian-made concrete pipe machinery since 1957 — over 60 years of specialised manufacturing experience.
CGM
Accessories & Multiproducts
Precision machines and moulds for concrete products since 1962, deployed across 40+ countries.
Precast Systems & Formwork
Systems, PC Elements & Formwork
Complete production systems, precast elements, and mould solutions for concrete plants.
Nordimpianti
Hollowcore Slab System
The global leader in hollowcore slab technology, with 200+ plants commissioned worldwide since 1974.
MFL Group
Cable Industry Machinery
Deep engineering knowledge in drawing, stranding and extrusion machinery for wire, rope and cable production.
Marcantonini
Batching Plant & Concrete Distributor
- Marcantonini manufactures world-class batching plants, setting the benchmark for precision and reliability in dry-mix concrete production.
- Engineered specifically for zero-slump and stiff-consistency concrete mixes, delivering consistent quality at high output rates.
- Superior humidity control systems ensure optimal moisture distribution, eliminating product variability across every production cycle.
- Every plant is custom-configured to match your site conditions, production capacity, and aggregate specifications.
Visit Marcantonini website for more information.
Poyatos
Modular Paving Block Machine
Poyatos is a globally recognised equipment manufacturer specialising in fully integrated plant solutions for concrete masonry, paving blocks, kerbs, and landscape products. Their modular systems are engineered for maximum output efficiency, minimal maintenance, and long operational life — trusted by producers across more than 80 countries.
Visit Poyatos website for more information.
Colle
Concrete Pipe, Rectangular Box Culvert Machine
- Specialized in concrete pipe machinery
- Italian company focused on concrete pipe machines
- Established in 1957 — over 60 years of industry experience
Visit Colle website for more information.
Roller Suspension Machine
A highly flexible pipe production machine, ideal for operations that need frequent mould changes within a single shift. Simple to operate with minimal maintenance requirements, and its flexible design needs only a basic foundation.
| Model | Pipe Diameter (mm) | Length (mm) | Average Motor Power | Best Use For |
|---|---|---|---|---|
| XG 600 | 300–600 | 2000–3000 | 18.5 kW | Flush Joint (FJ), Rubber Joint (RJ), Jacking Pipe |
| XG 1200 | 600–1200 | 2000–3000 | 45 kW | Flush Joint (FJ), Rubber Joint (RJ), Jacking Pipe |
| XG 1500 | 800–1500 | 2000–2500 | 75 kW | Flush Joint (FJ), Rubber Joint (RJ), Jacking Pipe |
| XG 2000 | 1200–2000 | 2000–2500 | 115 kW | Flush Joint (FJ), Rubber Joint (RJ), Jacking Pipe |
| XG 2400 | 1500–2400 | 2000–2500 | 160 kW | Flush Joint (FJ), Rubber Joint (RJ), Jacking Pipe |
Rebar Processing Machineries
Manufacturer: TJK Machinery (Tianjin) Co., Ltd
Stirrup Bending Machine
A CNC-controlled stirrup bending machine built for rebar processing plants that need consistent, high-volume stirrup output. A disc-type bending mechanism keeps finished stirrups from colliding with one another during production, giving a near-perfect pass rate, while a high-speed servo drive with real-time closed-loop control keeps every piece accurate to spec. A patented four-sided mobile cutter and built-in shape library let operators switch between stirrup patterns quickly, with over 2,000 units already running in the field worldwide.
| Specification | Detail |
|---|---|
| Wire Diameter | Single wire 5–13 mm / Double wire 5–10 mm |
| Control System | PLC with LCD display, closed-loop servo drive |
| Cutter Design | Patented mobile cutter, 4 working sides |
| Best Use For | High-volume stirrup & rebar cage production |
Wire Mesh Welding Machine
A fully automatic CNC production line that welds reinforcing wire into mesh panels at high speed, with each wire fed, positioned, and welded with tight precision before being cut and stacked automatically. Water-cooled transformers, electrodes, and control components keep the line running reliably through long production shifts, and the machine can weld wires of different diameters in the same panel — well suited for precast concrete reinforcement, flooring mesh, and fencing panels.
| Specification | Detail |
|---|---|
| Wire Diameter | 3–12 mm |
| Welding Speed | 60–90 m/min |
| Max Mesh Width | 4000 mm |
| Best Use For | Precast reinforcement mesh, flooring mesh, fencing panels |
Rebar Bending Machine Line
A heavy-duty CNC bending line for large-diameter reinforcing bar, built on European-engineered technology for accuracy on demanding structural work. High-precision PLC control drives bends from 0° to 180° across a wide diameter range, and the inclined working table keeps operators clear of the bending head for safer handling of long, heavy bars — suited to bridge, high-rise, and heavy infrastructure projects.
| Model | Bar Diameter | Bending Angle | Notes |
|---|---|---|---|
| G2L25X | 10–25 mm | 0°–180° | Compact line for standard structural work |
| G2L32E-2 | 10–32 mm | 0°–180° | Mid-range capacity line |
| G2W50 | 10–50 mm | 0°–180° | 380V 50Hz · bender speed 0.5–1 m/s · footprint 12500×2200×1020 mm |
Concrete Curing Technology
Manufacturer: Curetec (固尔特（上海）新能源科技有限公司)
CureSteam (NDG Low-Pressure Steam System)
A low-pressure steam curing system that replaces traditional boilers, generating steam up to 350°C within seconds and holding precise, sensor-controlled temperatures throughout the cure cycle. Faster heat-up and tighter control shorten curing time, improve concrete quality, and reduce cement consumption, while using roughly half the energy of a conventional boiler setup — well suited to tunnel segments, railway sleepers, PC components, and marine piles.
| Specification | Detail |
|---|---|
| Max Temperature | Up to 350°C |
| Response Time | Generates steam within seconds |
| Energy Efficiency | ~50% energy savings vs. traditional boilers |
| Best Use For | Tunnel segments, railway sleepers, PC components, marine piles, pipes |
CureFog
A modular misting and humidification system that atomizes water through fine nozzles and distributes it through a pipe network into the curing chamber, holding humidity at the level concrete needs without forming condensation on cold surfaces. The modular layout scales to the size of the curing room, uses less water than conventional methods, runs on low energy, and doubles as a dust-suppression and cooling tool elsewhere on site.
| Specification | Detail |
|---|---|
| Delivery Method | Atomized misting through modular nozzle & pipe network |
| Condensation | None — misting avoids water droplet formation |
| Water & Energy Use | Reduced water consumption, low power draw |
| Best Use For | Humidity control in curing chambers; also dust suppression & cooling |
CureFlow
An air circulation system that keeps curing-room air constantly moving to stop condensation from forming on cold surfaces and to eliminate the temperature zones that cause uneven curing, efflorescence, and color inconsistency across a batch. High-performance, customizable fan configurations are sized to the curing room, delivering even temperature and humidity distribution at low energy cost.
| Specification | Detail |
|---|---|
| Function | Continuous air circulation, custom fan configuration |
| Prevents | Condensation, temperature stratification, efflorescence, uneven color |
| Best Use For | Precast curing rooms needing uniform temperature & humidity |
CGM
Concrete Accessories & Multiproducts
Since 1962, CGM has been engineering precision machines and moulds for concrete products. With over six decades of research and deployment across more than 40 countries, CGM delivers unrivalled know-how in concrete multiproduct manufacturing — from hollow blocks to complex architectural elements.
Visit CGM website for more information.
Precast Systems & Formwork
Production Systems
A range of production system layouts for precast concrete elements — carousel, stationary, prestressed, flexible, and mobile configurations — built around highly mechanized process planning, automated mould circulation, and intelligent tensioning and curing control. Layouts scale from small and medium component lines up to full prestressed long-line and sleeper production, keeping energy use and changeover time low across the plant.
| System Type | Best Use For |
|---|---|
| Carousel Production System | High-volume, standardized element production |
| Stationary Production System | PCF boards, balconies, A/C boards; flexible manual changeover |
| Mobile Production System | Site-relocatable production, minimized transport cost |
| Prestressed Long-line System | Automated tensioning for prestressed elements |
| Sleeper Production Line | Railway sleeper manufacturing with automated mould circulation |
PC Elements
A range of precast concrete (PC) elements engineered for fast on-site assembly and reliable structural performance — staircases, lattice grid slabs, solid wall panels, and insulated sandwich wall panels — each available in standard sizes or customised to project requirements.
| Element | Key Advantage |
|---|---|
| Staircases | Standard and custom sizes and shapes |
| Lattice Grid Slab | Fast construction, lightweight, low hoisting demand |
| Solid Wall Panel | Higher load capacity, noise and fire protection |
| Sandwich Wall Panel | Insulated; load-bearing or non-load-bearing options |
Formwork & Mould
A full range of mould and formwork tooling built to customer specification — including inspection well moulds, mould tables, staircase moulds, column and beam formwork, double-T moulds, and wall panel moulds — along with supporting tooling such as lifting equipment and stacking racks to keep mould handling efficient across the plant.
| Mould Type | Application |
|---|---|
| Inspection Well Mould | Manholes and utility chambers, fast mould removal |
| Pallet / Mould Table | Fixed, carousel, or flip-table production |
| Staircase Mould | Sliding vertical, horizontal, or lifting configurations |
| Column & Beam Formwork | Individual, grouped, or long-line setups |
| Double-T Mould | Self-supporting or expandable long-line configurations |
| Wall Panel Mould | Flat or vertical panel production |
Nordimpianti
Hollowcore Slab & Prestressed Concrete System
Founded in 1974, Nordimpianti is the global leader in hollowcore slab production technology. With over 200 prestressed concrete slab plants commissioned worldwide, Nordimpianti systems are synonymous with reliability, dimensional accuracy, and high production throughput — the preferred choice for structural precast producers.
Visit Nordimpianti website for more information.
Cable Industry
MFL Group
Cable Industry Machinery
MFL Group possesses deep industry knowledge in engineering and manufacturing of drawing, stranding, and extrusion machinery for wire, rope and cable production.
Visit MFL Group website for more information.
